1. Chemical Product and Company Identification

Chemical Name: SLIP Plate Chain & Cable Aerosol
Manufacturer: Superior Graphite
Address: 10 S. Riverside Plaza
Chicago IL 60606
Information Number: (312) 559-2999

2. Hazards Identification

Route (s) of Entry:InhalationSkinIngestion
YesYesYes

Health Hazards (acute and chronic): Eye, skin and respiratory system irritant. Reports have associated repeated and prolonged occupational exposure to solvents with permanent brain, peripheral nervous system, and other internal organ damage. There is no reported human evidence that these effects occur when exposure is maintained below OSHA and ACGIH limits.

Carcinogenicity:NTPIARC MonographsOSHA Regulated
NoNoNo
Notes:


Signs and Symptoms of Exposure:
Inhalation: Respiratory irritation, dizziness, headache, nausea, fatigue, drowsiness, impaired coordination, central nervous system depression or heart arrhythmia.
Skin: Contact may dry the skin prolonged contact may cause irritation. Can not be easily absorbed through the skin. Solvent action can dry and de-fat the skin causing skin to crack, leading to dermatitis.
Eyes: Liquid or vapor can cause moderate to severe irritation.
Ingestion: Not a likely route of exposure.

Medical Conditions Generally Aggravated by Exposure: None known.

3. Composition/Information on Ingredients

Hazardous ComponentsCAS#OSHA PELACGIH TLVOther Limits%
Petroleum Oil (mist)

Purified Carbon
(as total dust)
(as respirable dust)

Heptane

Acetone

Butane

Propane
64742-52-5

64743-05-1



142-82-5

67-64-1

106-97-8

74-98-6
5 mg/m3


15 mg/m3
5 mg/m3

500 ppm

750 ppm

800 ppm

1000 ppm
5 mg/m3


10 mg/m3
3 mg/m3

400 ppm

750 ppm

800 ppm

1000 ppm
None


None


None

None

None

None
<70


<10


<20

<10

<6

<6
Notes:


4. First Aid Measures

Eyes:
Flush thoroughly with water for 15 minutes. Get medical attention.
Skin:
Wash exposed skin with soap and water. If irritation persists get medical attention. Launder severely contaminated clothing before reuse.
Ingestion:
Do not induce vomiting. Get medical attention.
Inhalation:
Remove to fresh air. Administer oxygen if needed. Apply artificial respiration if breathing has stopped. Get medical attention.

5. Fire Fighting Measures

Flash Point: (method)N/AFlammable Limits:LEL:UEL:
N/DN/D

Extinguishing Media: Dry chemical, foam, CO2 and water fog.
Special Fire Fighting Procedures: Use water to cool containers exposed to flames. Do not enter enclosed or a confined work space without proper protective equipment. Fire fighting personnel should wear respiratory protection (positive pressure if available).
Unusual Fire and Explosion Hazards: Closed containers may explode from internal pressure build-up when exposed to extreme heat and discharge contents. Vapor accumulation can travel along the ground to a distant source of ignition and flash back or explode if ignited. Overexposure to decomposition products may cause a health hazard. Symptoms may not be immediately apparent.

NFPA Hazard Rating:

Health
Flammability
Reactivity
1
4
0
NFPA Notes:


6. Accidental Release Measures

Spill/Leak Procedures: Avoid breathing vapors. Ventilate area, remove all sources of ignition. Clean up area with absorbent material and place in closed containers for disposal. Wash floor with soap and water.

Dispose of in accordance with local, state and federal regulaitons.

7. Handling and Storage

Handling and Storage Precautions: Store and use in cool, dry, well-ventilated areas. Do not store above 120 F. Do not puncture or incinerate (burn) cans. Do not stick a pin, nail or any other sharp object into opening on top of can. Small pressurized containers of flammable products may be stored in areas suitable for ordinary combustibles except that they should not be stored in basements. See product label for additional information.
Work/Hygienic Practices: Wash exposed skin with soap and water after handling this product. Do not spray in eyes. Do not take internally.

8. Exposure Controls/Personal Protection

Respiratory Protection (specify type): Use NIOSH/MSHA approved mask for chemical products if ACGIH, OSHA and/or TWA limits will be exceeded.
Local Exhaust
Mechanical (general)
Special
Other
Recommended
Recommended
None
None

Eye/Face Protection: Safety glasses, goggles or face shield. Eye wash station should be available.
Skin Protection: Use Rubber, Nitrile (NBR), Butyl or Polyethylene gloves. Safety shower should be available.

9. Physical/Chemical Characteristics

Physical State:
Liquid
Boiling Point:
N/A
Appearance:
Aerosol
Melting Point:
N/A
Odor:
N/A
Vapor Pressure (mm Hg):
N/A
Specific Gravity (H2O=1):
N/A
Vapor Density (air=1):
N/A
Water Solubility:
Negligible
Evaporation Rate:
(Butyl Acetate = 1)
N/A
10. Stability and Reactivity

Stability: Material is stable.
Incompatibility (materials to avoid): Strong oxidizing agents, acids and alkalis.
Hazardous Decomposition Products: On burning, may release carbon dioxide and carbon monoxide.
Hazardous Polymerization: Will not occur.

14. Transportation Information

Air: "UN1950, Aerosols, flammable, 2.1"

Highway: "Consumer Commodity, ORM-D"

Ocean: "UN1950, Aerosols, 2.1, Ltd Qty"

16. Other Information

Disclaimer: The information contained herein is based on data available. However, no warranty is expressed or implied regarding the accuracy of the data or the results obtained from the use thereof. Because the information contained herein may be applied under conditions beyond our control, we assume no responsibility for its use.

All components of this product are on the TSCA inventory.

Unk. = Unknown
N/A = Not applicable
Nav = Not available
N/D = Not determined
N/E = Not established
Prop. = Proprietary



Prepared: Date 08/11/93
Revised: Date 01/20/2014